6 Must-Follow Steps For Rainwater Harvesting In Australia

The use of water as a resource is imperative for survival in our daily routines, countries or communities need to be more cautious about the preservation of water even those ones where such resource can be found in abundance or which does not come under the strike of draughts. As it is about the survival of mankind. There are many ways through which water can be stored and kept from getting wasted in Australia but one of the most popular ones nowadays is via rainwater harvesting to maximize the efficiency of it. In this method, rainwater is deliberately stored into tanks or barrels which falls off the ground or surface instead of letting it run off and going down to the municipal drainage systems across Australia. By collecting rainwater, we do not only have access to the cleanest and healthiest water resource but can also reduce the burden on our water supply bills as well ease the pressure on government, dams and treatment plants to provide us with the clean and sufficient water supply.

There are many methods to preserve the rainwater, ChemStoreGroup in Australia has been doing the job of rainwater storage since long by using water tanks to serve the purpose at hand. These water tanks should be spacious enough to store more water as compared to the small sized tanks. The best way out is to place them underground as your upper surface would not look cluttered this way as well.

Below is given a few tips which would help you at installing best rainwater harvesting system at your home for water preservation, such as:

Placement

Like mentioned earlier, placement of rainwater tank is very critical in determining the extent of storage. You should place it at that place where there is a shade so the inner temperature could be maintained at even instead of letting the water evaporate in extreme weather conditions. Similarly, you can place your rainwater harvesting system underground to control the temperature fluctuations once and for all.

Regular Use

It is important for smooth operations of the rainwater harvesting in Australia that it should be used on a daily basis so there’s always a space available to store more water when it rains. If you have been using your rainwater for watering the garden only when it is recommended to plumb it somehow to the laundry and toilet as well so the flow of water can also be maintained optimally along with the storage.

Be Smart

There are few areas in Australia where hot weather climate encompasses a major part of the year, preserving rainwater in such areas is quite a daunting task. Therefore, be very smart with your rainwater harvesting in these areas especially. For instance, if you have been using harvest rainwater for laundry then you can also utilise its grey water for watering the garden or to flush the toilet, to name a few possibilities.

Cleaner Gutters, Cleaner Rainwater

It is very important to clean the gutters regularly and also use gutter protectors to ensure the high-quality rainwater harvesting in Australia. This practice would also help you in bringing down your underground maintenance costs.

Maintenance

Underground rainwater harvesting system requires you to clean the mosquito screens from inlets and outlets, replace the diverts when needed. Similar is the case with need-based filters. Apart from these, you should also consider draining out your tank and cleaning it intermittently (after a few months or so) to remove any sediments and harmful screens from the installed system. ChemStoreGroup in Australia can help you with the post installation maintenance as well as with the routine practice of preserving the rainwater in a right way. Their team of experts works great with its client-centric approach.

Ease of Access

While installing the system, make sure that you have easy access to the pipe, inlets, and outlets to trigger repairs whenever needed. This will make the whole maintenance process easier and cheaper as well.

When the rain out pours and your underground harvesting system fills up then you should divert the rainwater to the storm way pipe and later use it to water the garden or for other means. The idea is to use more rainwater in the season so the flow of the rainwater harvesting system in Australia could be maintained appropriately. Though, it is illegal in some states to connect the rainwater pipes with the sewer system, therefore, be aware of the local laws as well.