Category

Industrial Services & Equipment

6 Must-Follow Steps For Rainwater Harvesting In Australia

By | Industrial Services & Equipment | No Comments

The use of water as a resource is imperative for survival in our daily routines, countries or communities need to be more cautious about the preservation of water even those ones where such resource can be found in abundance or which does not come under the strike of draughts. As it is about the survival of mankind. There are many ways through which water can be stored and kept from getting wasted in Australia but one of the most popular ones nowadays is via rainwater harvesting to maximize the efficiency of it. In this method, rainwater is deliberately stored into tanks or barrels which falls off the ground or surface instead of letting it run off and going down to the municipal drainage systems across Australia. By collecting rainwater, we do not only have access to the cleanest and healthiest water resource but can also reduce the burden on our water supply bills as well ease the pressure on government, dams and treatment plants to provide us with the clean and sufficient water supply.

There are many methods to preserve the rainwater, ChemStoreGroup in Australia has been doing the job of rainwater storage since long by using water tanks to serve the purpose at hand. These water tanks should be spacious enough to store more water as compared to the small sized tanks. The best way out is to place them underground as your upper surface would not look cluttered this way as well.

Below is given a few tips which would help you at installing best rainwater harvesting system at your home for water preservation, such as:

Placement

Like mentioned earlier, placement of rainwater tank is very critical in determining the extent of storage. You should place it at that place where there is a shade so the inner temperature could be maintained at even instead of letting the water evaporate in extreme weather conditions. Similarly, you can place your rainwater harvesting system underground to control the temperature fluctuations once and for all.

Regular Use

It is important for smooth operations of the rainwater harvesting in Australia that it should be used on a daily basis so there’s always a space available to store more water when it rains. If you have been using your rainwater for watering the garden only when it is recommended to plumb it somehow to the laundry and toilet as well so the flow of water can also be maintained optimally along with the storage.

Be Smart

There are few areas in Australia where hot weather climate encompasses a major part of the year, preserving rainwater in such areas is quite a daunting task. Therefore, be very smart with your rainwater harvesting in these areas especially. For instance, if you have been using harvest rainwater for laundry then you can also utilise its grey water for watering the garden or to flush the toilet, to name a few possibilities.

Cleaner Gutters, Cleaner Rainwater

It is very important to clean the gutters regularly and also use gutter protectors to ensure the high-quality rainwater harvesting in Australia. This practice would also help you in bringing down your underground maintenance costs.

Maintenance

Underground rainwater harvesting system requires you to clean the mosquito screens from inlets and outlets, replace the diverts when needed. Similar is the case with need-based filters. Apart from these, you should also consider draining out your tank and cleaning it intermittently (after a few months or so) to remove any sediments and harmful screens from the installed system. ChemStoreGroup in Australia can help you with the post installation maintenance as well as with the routine practice of preserving the rainwater in a right way. Their team of experts works great with its client-centric approach.

Ease of Access

While installing the system, make sure that you have easy access to the pipe, inlets, and outlets to trigger repairs whenever needed. This will make the whole maintenance process easier and cheaper as well.

When the rain out pours and your underground harvesting system fills up then you should divert the rainwater to the storm way pipe and later use it to water the garden or for other means. The idea is to use more rainwater in the season so the flow of the rainwater harvesting system in Australia could be maintained appropriately. Though, it is illegal in some states to connect the rainwater pipes with the sewer system, therefore, be aware of the local laws as well.

Your Guide To Dealing With A Gas Leak

By | Industrial Services & Equipment | No Comments

There is a good chance that you use natural gas to power a number of appliances in your home. At the very least, it helps to keep your cooker and your hot water running smoothly. While it is one of the most helpful resources around, these fumes can be quite deadly. A gas leak can cause fires, injuries, and even fatalities in households as well as commercial properties. Due to all of the risks involved, you should be fully aware of the precautions that you need to take in the event of a leak.

First things first, nonetheless. The best way to avoid all of this panic and hazard is to take preventative measures. One of the main reasons that such leaks occur is due to an improperly fitted hose for one of the appliances. This is why it is important to have well-trained gas fitters Joondalup handle such jobs. They will be able to ensure that all of the hoses and other parts are tightly fixed and that no vapours will escape.

Establish If There is a Leak

The first thing that you have to do is, of course, make sure that there is actually a leak. The most common way to identify if the vapour is dissipating into your home is by smell. On its own, natural gas doesn’t actually have an odour. However, companies add a discernible smell so that you can quickly identify whether or not there is any outflow. You may also hear a hissing noise from the direction in which the fumes are escaping. It is important to note that if you have been breathing in the vapours, there may be side effects. Dizziness, light headedness, and nausea are all symptoms of being exposed to fumes.

Take Precautions

Now, it is quite obvious that you shouldn’t reach for matches or try to light any other naked flame around the house. What many people are not aware of, however, is that electricity can be just as dangerous. Light switches and even doorbells can cause a spark which, in turn, could result in a fire. So, it is best to grab a torch rather than risk turning on the lights in your home. You should call Kernow Plumbing and wait until they arrive before you touch anything in your house.

Air Out Your Home

It is quite important to get the fumes out of your home. The best way to do this is to open the windows, doors, and other openings in your home. Once this has been done, you should step outside and wait in the fresh air. Under no circumstances should you remain in your home after a leak has been detected.

Turn Off the Main Supply

It is important that you know precisely where the gas meter is positioned. Once you have determined that there are toxic vapours spreading through your home, you are going to need to shut off the supply at the source. At the very least, this will prevent any more vapours from being released. Of course, you should remember that doesn’t mean that you or your home aren’t at risk any longer. Still, don’t turn on the supply until the professionals have checked everything out for you. It is a job for them.

This is what you need to remember if you are worried that toxic fumes are being released into your home.